Ericsson EDACS M-RK I, Operator'S Manual, Page: 48 / 76

completion of a data call (transmit or receive). If during a
data call one of the following conditions occurs, the data
call is immediately terminated and the radio performs the
desired function:
•
PTT activated.
•
Emergency declared by pressing the pre-pro-
grammed emergency button.
•
A group or system change.
Scan Lockout Mode
Following the transmission or reception of a data call,
if scan is enabled, scanning will stop temporarily [two
independent pre-programmed times (after receive data
call and after transmit data call)]. During this time the
BSY/SCN indicator will flash to indicate that scan is
enabled but temporarily suspended. This mode is nor-
mally exited when the pre-programmed time expires;
however, the following actions will terminate the scan
lockout mode before the time-out is completed.
•
The clear button is pressed.
•
The PTT is pressed.
•
A group or system change.
•
Phone call mode is entered.
•
Individual call mode is entered.
•
A new emergency assignment has been received.
•
An emergency declared or cleared.
•
An individual or phone call is received.
48