Ericsson EDACS M-RK I, Operator'S Manual, Page: 34 / 76

3. Continue with standard transmission procedures. A
private mode access tone will be heard when the PTT
button is pressed.
Scanned Group Calls
Receiving a scanned group call is the same as receiv-
ing a selected group call. During the scan hang time, if
the radio was programmed for autoselect, it will transmit
back in the same mode it received the call. For example,
if a clear group is entered in the scan list, it will only
receive clear calls. If the same group was available in
private and entered in the scan list, it can receive clear
and private calls, provided autoselect was programmed
in the radio. The user can select transmitting on the
scanned or selected group. If a group is entered in the
scan list more than once and in different modes (clear,
digital, private), only the first occurrence of the group will
be used.
LAST SYSTEM/GROUP OR CHANNEL RECALL
(SUPERVISORY RADIO UNITS ONLY)
This feature enables the user to recall the last se-
lected system/group after an EDACS emergency or
home function, a conventional emergency or home func-
tion or system/group key function. This feature must be
pre-programmed as "Enabled" to function. For exam-
ple, if the Home button (pre-programmed) is pressed,
the radio will go to the designated Home system/group
or channel. If the Home button is pressed again, the
radio returns to the previous system/group or channel.
At this time the user can toggle between the Home
system/group or channel and the previous system/group
or channel.
34