33
3/1531-ZAP 701 14/1 Uen A 2006-10-16
AXX 9100 CONNECT R1.2 Quick Reference Guide
2
Configuration of AXX 9100 CONNECT
2
2.1
Initial configuration
2.1.1
Commissioning of IP address via VT100
Interface
Brief Description
A local terminal with VT100 emulation is required during the first
commissioning of the network element in order to set up the
necessary communications parameters enabling access to the
element via AXX 9820 CRAFT over the Management Port. After the
first commissioning, the VT100 interface can be used for modifying
the communications parameters and perform some status checks of
the network element. The VT100 interface is password protected.
N O T E !
Make sure that the AXX 9820 CRAFT software is installed
on your PC before proceeding.
AXXCLI is a line-oriented ASCII-based management interface
embedded in the AXX network element.The AXXCLI is accessed
via the VT100-port. The serial connection communications
parameters are fixed:
•
19200 bit/s,
•
no parity,
•
8 bits,
•
1 stop bit,
•
and no hardware flow control.
VT100 terminal codes are used. Default Telnet password is telnet.
The VT100-port (Console port) for the AXX network element is
provided using a RJ-45 connector. The cable for connecting the
