STEP is also used to scroll through the pro-
grammed special call table when the special call
mode is enabled.
SCAN BUTTON
Pressing the SCAN button on the keypad will toggle
scan operation on and off. When the radio is scan-
ning, the "SCN" status flag in the display will show and
all groups/channels on the scan list in the current
system will be scanned.
SPECIAL CALL BUTTON
When operating in trunked mode, pressing SPC
will switch operation from the group select mode to
the special call mode. The last selected special call
will be displayed.
While in special call mode, the next programmed
special call may be selected by pressing STEP.
Pressing 2nd then STEP will select the previous
programmed special call. The caller’s ID of the last
received individual call and the last received group
call on the selected group are also selectable using
this method. See Special Calls for details.
2nd FUNCTION BUTTON
Two (2) of the buttons on the keypad are dual-
function buttons. Press and release the blue 2nd
function button to shift keypad selection to the A/D
and PVT buttons. The following paragraphs describe
operation of the shifted buttons.
ADD/DELETE BUTTON (Shifted SCAN Button)
When in trunked mode, pressing and releasing
2nd and then pressing A/D (shifted SCAN button) will
add the selected group to the scan list if it is not
already on the list. Repeating this sequence will
delete the group from the list. When the selected
group is on the scan list, the "S" status flag will show
in the display.
In conventional mode, pressing and releasing 2nd
and then pressing A/D will scroll the selected chan-
nel’s scan priority between non-priority scan ("S"
status flag), priority-two scan ("2" status flag), prior-
ity-one scan ("1" status flag) and no scan (no status
flags).
7
