Ergon CF3, Installation And User Instructions Manual

Page: 62 / 104

62
EN
Fig. H: Fit the seatpost according to the required
extension ‘ b ’. Tight the seatpost clamp.
Set the saddle angle
‘a’
(using your notes or instructions on page 49) and tighten
the clamping screws to 6 - 7 Nm. Do not exceed 7 Nm (Fig. G) . The Anti-Slip
Shim must be secure, unable to move. It must be flush to the sides of the post.
Re-fit the seatpost, and the correct saddle height
‘b’ . Tighten the seatclamp
using the torque setting as described previously. Do not clamp the Ergon CF3
using more than 7 Nm torque
(Fig. H) . If the seat post still slips when you sit on
it even with the use of the Ergon shim then the post will not work on your frame.
Fig. G: Set the saddle angle ‘ a ’ (using your
notes). Fasten the lock screw.
7 Nm
max.
7 Nm
b
a