background image

11

                                   

remote control pairing

Remote Pairing

*ALTERNATE REMOTE PAIRING PROCESS!

Locate the Control Box (see base overview and quick 

reference guide for corresponding base) and press the Reset/

Pairing  button twice.  A pairing LED light will illuminate green 

on the Control Box.  On the back of the remote, press and 

hold the PAIR button.  The PAIR button will illuminate blue and 

start flashing. When the PAIR button stops flashing, the green 

LED light on the Control Box will go out.  Release the PAIR 

button.  The remote is now paired to the adjustable base.

Pairing 

LED Light

Reset/Pairing

Button

POWER DOWN 

Button

Test all remote functions.  If the remote buttons do not impact the 

adjustable base movements, please repeat the process again or 

call Ergomotion customer service: U.S. 1-888-550-3746

STEP 1

The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the 

remote is not paired with the base, follow the steps below.

Locate the Power Down Box and 

press the button TWICE.  A light 

on the Battery Back Up Box will 

illuminate.

STEP 3

STEP 2

Remove the back cover of 

the remote, press and hold 

down the PAIR button. The 

PAIR button will illuminate blue 

and start flashing.  When the 

PAIR button stops flashing, 

the illuminated light on the 

Battery Backup Box will go out.  

Release the PAIR button.  The 

remote is now paired to the 

adjustable base.

PAIR 

Button

Summary of Contents for STYLE 1001


























Reviews: