ergoline Prestige 1150 Intelligent Performance, Operating Instructions Manual

Page: 60 / 84

Cleaning and maintenance
58/80
4.9 Cleaning or replacing UV lamps in the
base
– Lift up the acrylic glass panel and then remove the lamp covers and the
partition: see page 48.
Replacing lamps: see page 54.
Changing the chip card: see page 53.
The assembly is the same process in reverse order.
When assembling the device please note:
– You must ensure that the recesses are at the foot end when you fit the
partition.
– Lift the partion up slightly and then close it.
4.10 Cleaning or replacing the UV lamps
and filter panel in the side section
– Removing the side section panel: see page 50.
– Remove the lamp cover.
Replacing lamps:
UV low pressure lamps: see page 54.
UV high pressure lamps and filter panels: see page 56.
Changing the chip card: see page 53.