ergoline OPEN SUN 1050 ULTRA POWER, Operating Instructions Manual

Page: 49 / 88

48
Safety instructions for maintenance and care
Maintenance and care play a major role in deciding whether your sunbed
meets your requirements satisfactorily. Compliance with the specified
maintenance intervals and the careful conducting of the maintenance
and care work are therefore absolutely necessary.
You can call up the current operating hours of the parts to be serviced in
preset mode.
Refit any protective devices (e.g. filter panels) after finishing working on
the sunbed.
Please note that the device must be inspected regularly by our customer
service or an approved specialised company every 12 months (from date
of commissioning) to maintain its proper condition.
Danger!
Disconnect the sunbed from the power supply when performing
maintenance work requiring opening of the device.
See Page 49.
Caution!
Use only genuine spare parts of the same type! The use of
other parts voids the CE conformity!
Any liability for damage or injury proven to be the result of the
use of non-genuine spare parts is excluded.
Fire hazard!
High-pressure lamps that have not been approved by Ergoline
can explode. Hot lamp components can set other components
on fire. People can be killed or severely injured due to smoke
inhalation and fire.
– Only fit high pressure lamps recommended by Ergoline.
– Clean the inside of the tanning device regularly. Dust
particles are combustible!
JK 60/80 EF
MADE IN GERMANY
15066 / 0