www.sollatek.com
the power to protect
the power to protect
U
SE
R I
NS
TR
U
C
TI
O
NS
STEP 1.
Fully charge iGlow lantern by plugging it to a USB power source for at least
3 hours using the provided cable. The charge port is the Micro USB (see
diagram below). Or charge from the sun (at least 10hours) using the solar
panel on top of the unit
Step2.
When fully charged, all 4 LEDs should be illuminated (not flashing).
Step 3.
To operate iGlow lantern, turn on power switch:
Press switch once
Front LED On
Press switch again
Front LED off, main LED low power
Press switch again
Front LED off, main LED high power
Front LED Indicator
4 LEDs indicate battery level during charge
All 4 LEDs illuminated
Power switch
Output USB port for charging your USB device
Input Micro USB port for charging the iGlow
