What to do when things go wrong
0
4
/2019
1019103-00
A
Operating instructions – 83/98
NOTE:
Occasionally, persons using the tanning device will experi-
ence a slight reddening of the skin – usually in small patches
– after the second or third session. This redness is often
accompanied by an itching sensation. This may be nothing
more than a very limited heat 'rash' caused by heat from the
lamps within the device. It should go away within approxi-
mately 24 hours and should not reappear. This rashing can
be lessened or prevented by applying moisturizer lotion to the
affected area after the tanning session is completed.
Follow instructions.
Increasing tanning also requires an extension of the
exposure time (= radiation time) or after a certain degree
of tanning has been achieved, a further intensification is
not possible. However, the radiation time may not be ex-
tended as desired within the scope of the permissible ra-
diation doses! Therefore, only a certain degree of final
tanning dependent on the skin type can be achieved
without endangering your health.
Inform users about proper tanning.
13.1
Troubleshooting
Software and device malfunctions are indicated by error codes, e.g. E005.
These error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.
If several errors occur, the error messages are displayed alternately.
Error elimination is acknowledged by pressing the
START/STOP
button.
If the error cannot be cleared, contact Customer Service (see page 2) or
your local service provider
More detailed information regarding the error description and solutions is
available in the document 'Error codes' #1011831-.., which you find in the
Technical Documentation folder.
For authorized, trained and qualified staff:
For further technical description, please contact Customer Service (see
page 2).
WARNING!
Danger of skin injuries and skin diseases.
–
The tanning device must never be used if a filter panel
is missing or damaged, or the timer is defective!