How to use this device
0
4
/2019
1019103-00
A
Operating instructions – 73/98
The assembly is the same process in reverse order.
When assembling the device please note:
–
Clean the partition.
–
Hold the partition with a cloth in order to prevent finger prints.
12.16.7
Cleaning or replacing the lamps in the side
section
Not applicable for this device.
12.16.8
Cleaning or replacing lamps in the canopy
–
Removing the canopy panel: see page 65.
The following components listed in the maintenance plan are fitted in the
canopy:
UV low pressure lamps (1.80 m): see page 69.
Low pressure lamps (1.80 m): see page 69.
Facial tanner UV low pressure lamps and the associated starters:
see page 69.
Facial tanner UV high pressure lamps: see page 71.
Facial tanner filter panels: see page 71.
–
Please maintain the correct order of the Genesis Type R HYBRID
Performance low pressure lamps and Genesis Type U HYBRID
Performance UV low pressure lamps.
a1: Genesis Type R HYBRID Performance low pressure lamps
a2: Genesis Type U HYBRID Performance UV low pressure lamps
The facial tanner's low pressure lamps must be removed first so that the
UV high pressure lamps and the filter panels can be changed.
–
Remove the lamps.
a1
a2
19193 / 0
