ergoline ergoselect 50, Operator'S Manual

Page: 36 / 40

- 36 -
G
UiDanCe anD
m
anUfaCtUrer
’
s
D
eClaration
– e
leCtromaGnetiC
i
mmUnity
The ergoselect ergometer is intended for use in the electromagnetic environment specified below It is the responsibil-
ity of the customer or user to ensure that the ergoselect ergometer is used in such an environment
ImmunityTest IEC 60601 Test Level Compliance Level Electromagnetic Environment -
Guidance
Electrostatic discharge (ESD)
to EN 61000-4-2 ± 6 kV contact
± 8 kV air ± 6 kV
± 8 kV Floors should be wood, concrete or ceramic tile
If floors are covered with synthetic material, the
relative humidity should be at least 30%
Electrical fast transient/burst
to EN 61000-4-4 ± 2 kV for power supply
lines
± 1 kV for input and output
lines ± 2 kV passed Mains power should be that of a typical commer-
cial or hospital environment
Surge to EN 61000-4-5 ± 1 kV differential mode
± 2 kV common mode ± 1 kV± 2 kV Mains power should be that of a typical commer-
cial or hospital environment
Voltage dips, short interrup-
tions and voltage variations
on power supply input lines to
EN 61000-4-11 < 5 % UT
(> 95 % dip in UT)
for 0 5 cycles
40 % UT
(60 % dip in UT)
for 5 cycles
70 % UT
(30 % dip in UT)
for 25 cycles
< 5 % UT
(> 95 % dip in UT) for 5 s
< 5 % UT
40 % UT
70 % UT
< 5 % UT
Mains power should be that of a typical com-
mercial or hospital environment If the user of the
ergoselect ergometer requires continued operation
during power mains interruptions, it is recom-
mended that the ergoselect ergometer be powered
from an uninterruptible power supply or a battery
Power frequency (50/60 Hz)
magnetic field to
EN 61000-4-8 3 A/m passed Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment The
ergoselect ergometer has no components suscep-
tible to magnetic fields
NOTE: UT is the a c mains voltage prior to application of the test level