ergoline ergoselect 50, Operator'S Manual

Page: 23 / 40

- 23 -
s
ettinGs with
C
ontrol
t
erminal
p
Some of the device settings are configurable to meet spe‑
cific requirements. The settings will be saved and remain
stored even when the ergometer is switched off.
Use the softkeys on the right and left (
↑ ↓
) to position the
bar cursor on SETTINGS and confirm the selection with
SELECT.
The configuration menu displays.
When all changes have been made, you can exit the con‑
figuration menu with the
key.
Use the softkeys on the right and left (
↑ ↓
) to position the
bar cursor on the parameter to change and confirm the
selection with SELECT.
D
efaUlt
m
oDe
In this menu you choose the default mode activated when
the ergometer is turned on. When first turned on, the
ergometer will display this menu.
Use the softkeys on the right and left (
↑ ↓
) to position the
bar cursor on your preferred default mode and save the
selection with SELECT.
p
rotoCols
Protocols 6 ‑ 15 are user‑programmable (protocols 1 ‑ 5
are fixed, see Appendix for protocol parameter details).
Standard values for the following parameters can be
entered:
‑ initial load
‑ stage time
‑ load increment (load increase with each stage)
Use the softkeys on the right and left (
↑ ↓
) to position
the bar cursor on the protocol to change (No. 6 ‑ 15) and
confirm the selection with SELECT.
PC Mode
Ergometry
Manual
Settings
Select
M
ain Menu
c
onfiguration Menu
Settings
Default Mode
Protocols
Contrast
Load Change
Language
Select
s
electing the default Mode
Default Mode
Menu
PC Mode
Ergometry
Manual
Select
s
electing the exercise test protocol to edit
Protocols
1. WHO
2. BAL
3. Hollmann
4. STD. France
5. Standard
Select