ergoline ergoselect 50, Operator'S Manual

Page: 14 / 40

- 14 -
Danger
• Patient Hazard •
To insure a safe connection to the protective ground system,
power cords of type „hospital only“ or „hospital grade“ have to
be used!
Note
• Disconnection from Mains •
Removing the power cord results in complete disconnection
from mains (all poles).
• Plug in the power cord on the underside of the
ergometer.
• Guide the power cord under the strain relief and screw
the strain relief to the frame: the plastic pin must lock
into place in the boring provided.
• Put the ergometer back on its feet and set the handle‑
bar to the correct position.
• Connect the power cord to a wall outlet.
p
ower cord with installed strain relief
Caution
• Equipment Damage •
Before connecting the ergometer to the power line, check that
the line voltage corresponds to the ratings on the type plate.
The type plate is located on the back of the ergometer, at the
bottom.