Operation Manual
Version: 12/01
43
er900L Operation Manual
Art-Nr: 475.043
Ergometer
Type
er900L
The meaning of the various training parameters :
max. Heartfreq
= alarm parameter, when reached will cause program termination
max. Systole
= alarm parameter, when reached will cause program termination
max. Diastole
= alarm parameter, when reached will cause program termination
Start Load
= load value with which the system begins stressing the patient.
The time interval for the initial load is specified by the interval for
the first load increment.
max. Load
= maximum load value that is not to be exceeded
Interv. BPM
= interval at which blood pressure readings are to be made
PWC
= heart rate value at which a PWC value is to be determined
(PWC value see appendix)
TRAININGSIND.
= see appendix
LOAD STEPS
= twelve load steps may be programmed individually. An entry
made into any one of these load steps will cause the same value
to be entered into all subsequent load steps.
INTERV.LOAD
= time interval of the load, that is elapsed time for the respective
load step.
LOAD CHANGE
= amount of load change with respect to the previous load step
Example
: Initial load
=
025 W
Load change 1
=
015 W +
__________
Load step 1
=
040 W
!
In Annex C attached to this operator’s manual, you will find programming
forms. We recommend that these forms be filled out before actually pro-
gramming the ergometer. Save these forms as they will be useful if some-
thing should happen to the ergometer.
Configuration
