ergoline ergometrics er900, Operation Manual, Page: 40 / 84

Operation Manual
er900L Operation Manual
36
Version: 12/01
Art-Nr: 475.043
Ergometer
Type er900L
7.3.3 ECG Start Pulse Duration (only for remote start of ECG)
The ergometer has a remote start output with which an ECG device can be triggered
(provided that the ECG device has a corresponding input). The feature programmed
below determines the period during which the remote start signal is applied to the out-
put. Signal duration is fully selectable in 1 second steps within a range of 0 - 99. Signal
duration is determined as follows:
" Press the button „ MONITOR “
The monitor main menu will appear in the
display
"
Using the arrow keys in the alphanumeric
keypad, move the cursor to the menu item
„
ECG RECORD “
"
Call up this subprogram by pressing the
button „
MONITOR “ again.
" Enter the period in seconds using the al-
phanumeric keypad. The cursor will auto-
matically advance.
"
Confirm the entry by pressing the „ RE-
TURN “ key. The main menu will then re-
appear.
You may now proceed to other menu items
or exit the monitor program by pressing the
button „
RETURN “ again.
$ $ $ $ $
MONITOR V.XXX
ACTIVATE PROGRAM
ADJUST CLOCK
mmHg - kPa
$ $ $ $ $
$ $ $ $ $
MONITOR V.XXX
LOAD INT/EXT
ADJUST LOAD - INPUT
ECG - RECORD
$ $
$ $
$
$ $
$ $ $
ECG - RECORD X X sec M
$ $
$ $ $
%
%
%
Configuration