Operation
9
N01B
STOP
START
1
2
3
4
5
6
12
11 10
9
8
7
13
1
The sunbed control panel is located at the head end of the canopy.
The tanning programme is started by inserting tokens or by the remote control system.
When connected to a JK microprocessor controller, the sunbed will switch on automatically after the selected warm-up
time has elapsed. If the STOP/START key is pressed during the warm-up period, the lamps will come on immediately. If
the lamps are switched off during the tanning period by pressing the STOP/START key, press the STOP/START key to
switch them back on again.
In this case, the facial tanners will only restart after approx. 1 minute.
While tanning is in progress, the canopy should be pulled down, closing the tanning compartment as far as possible.
Tanning with the tanning compartment open will reduce the sunbed's efficiency!
1
Intensity indicator, body fan, top or foot end
2
Intensity indicator, body fan, bottom or head end
3
Intensity indicator, facial tanners (4 settings). After switching on the sunbed/facial tanner, the indicator will flash
for 1 minute (OFF delay). If the facial tanner is switched off and then back on again while tanning is in progress,
the indicator will flash for 1 minute (ON delay)
4
Air conditioning ON indicator (the indicator will flash for 3 minutes if the air conditioning system is switched off
and then back on again while tanning is in progress.)
5
Shoulder tanner ON indicator
6
Display of elapsed tanning time in minutes/seconds (the remaining tanning time will be indicated if operated with
a JK salon control system)
7
STOP/START key (released by token box)
8
Shoulder tanner ON/OFF keys
9
Air conditioning system ON/OFF keys (ON delay of 3 minutes, see item 4)
10
Facial tanner intensity key (intensity selected in steps of one second; keeping minus key pressed at lowest set-
ting for longer than 3 seconds will switch off facial tanner - ON delay of 1 minute as described in item 3)
11
Body fan intensity control, bottom or head end
12
Body fan intensity control, top or foot end
Switching the lip illumination/star effect on and off
The illumination will come on when the sunbed is first started. The illumination switches off automatically
while tanning is in progress. On completion of fan run-on, the illumination can be switched off by pressing
the stop key.
Summary of Contents for Ergoline 500 Series
Page 2: ...2 ...
