STEP 7
Connect the Handset (Part 7) cable to the Control Box (Part 6).
Connect the motor cables on the Lift Columns (Part 3) to the
Control Box using the Lift Column Cables (Part 8). Connect the
Power Cord (Part 9) to the Control Box.
Secure all cables neatly using the Cable Clips provided (Part 10).
Ensure the Cross Rails (Part 2) are positioned evenly within the
End Frames (Part 1). Insert and fasten using 8 screws from Pack E in
a criss-cross pattern to fix the Cross Rails in position.
Note: If the cable cover tray is purchased. Align the cable cover tray
slots to the screw holes before fastening the screws.
STEP 6
