STEP 5
Orientate the side of the table top carton with the text
"Face up
during installation"
upwards. Open the carton and ensure that the
bottom surface of the table top faces upwards during installation.
Leave the table top in its original carton during installation
to avoid damaging the table top and its work surface.
Place the two assembled Lift Columns (Part 3) on the bottom
surface of the table top and insert the Cross Rails (Part 2) into the
End Frames (Part 1). Ensure the Cross Rail slots face inwards.
Check that the frame assembly is sitting flat on the table top and
tighten the screws in STEP 2 in a criss-cross pattern.
If the frame assembly does not sit flat, loosen screws
installed in step 2. Ensure frame assembly sits flat on the
table top before retightening in a criss-cross pattern.
