Set the minimum height
Move the table to the minimum height you would like to limit the table to. Press the M
and down arrow buttons together for approximately 5 seconds. Release the buttons
when you hear a buzzer sound, signaling minimum height set. To remove the custom
minimum height setting: 1) Use reset procedure or 2) Move the table to the minimum
height followed by pressing the M and down arrow buttons together for approximately
5 seconds. Release the buttons when you hear a buzzer sound, signaling the
cancellation of the custom minimum height.
Anti-Collision Sensitivity & Unit Of Height Setting
Please kindly contact technical support.
Warning:
Do not move the table continuously for more than 2 minutes without at least an 18
minutes break interval.
To avoid overloading the transformer, there is an overload protection program inbuilt
into the system. If the table stops working, let it cool off for at least 18 minutes before
trying to adjust the height again.
“E
09
”
will appear on the handset display if the lifting
mechanisms are overheated.
OPERATION GUIDE
