Ergofix BV 20 C, Operating Instructions Manual

Page: 15 / 32

BV 20 C
13
TABLE OF CONTENTS
1. Description page 13
2. Driving system page 13
3. Technical specifications page 15
4. Installation and adjustment page 16
5. Operation and maintenance page 16
6. Lubrication page 18
Fig. 1 : Driving system page 23
Fig. 2 : Installation page 24
Fig. 3 : Operation page 25
Fig. 4 : Lubrication page 26
ATTENTION
Before using your Ergofix multiple-function cutting machine, first read this
manual thoroughly, so that accidents can be prevented.
1. DESCRIPTION
Model BV 20 C multi-function cutting machine integrates the cutting, drilling and
milling together. Since this machine holds the virtues of multiple function and
superior performances, it can be applied in family service, small workshops and
repairing shops.
Before the operation of the machine the customers should read the manual
carefully.
2. DRIVING SYSTEM (see fig. 1)
The cutting spindle of the machine is driven by the motor (0,37 kW), transmitted
via belt, shaft and gear. The six changeable speeds can be available by means of
two speed change selector levers, meanwhile, the six reversal speeds can be also
gained by the counter rotation of motor.
The spindle for drilling and milling systems is driven by the motor (0,18 kW)
mounted on the spindle box, transmitted via belt. Through the change of pulley, 4
speeds can be available and by means of motor counter rotation, 4 reversal ones
can be also gained.