9
2. Installation and location selection
2.1. Bandage installation
The camera is designed with a bandage hole for fixing the camera.
Thread the bandage from one side to another side of the hole, then fix the bandage in a solid trunk of the
tree, you can adjust the tension of bandage to adjust the camera position, tighten it after the adjustment.
2.2. Seal the bottom cover
Camera is sealed with 20mm high-strength elastic metal buckle, after installation and testing, please
make sure the bottom cover locked firmly to ensure that the camera with good waterproof, dustproof
performance.
Note that the metal buckle should be fixed within raised part and then locked firmly.
2.3. Installation location selection
Selection of camera location see below.
After selecting shooting place, fix the camera on the thick trunk with the bandage and adjust the
induction angle.
When finishing, shake the camera to see whether firm enough.
If fixed in the wall, you need to install the matched mounting bracket by standard British screw holes.
The camera is installed on a relatively thick tree or on the wall, To keep the proper height when fixed, so that
it can shoot the corresponding action target.
Avoid direct sunlight on camera lens.
