17
ON Mode
Enter this mode, the indicator light starts blinking .Then the system starts the internal self-test and
enters a low-power consumption standby state after that, the LED turns off.
In this mode the camera will enter the normal working condition, starting PIR detecting.
When the side PIR is triggered, the camera starts pre-starting,not shooting photos; Only when the PIR is
triggered, can the camera automatically and quickly shoot and store the images.
In order not to affect the detected heat source object, in this mode the camera would be no light hint, also
no visible light and noise.
4.2. Set camera on PC
For multi camera parameter settings rapidly, users not only can set through its own menu on the camera,
but also can set parameters via PC setting software.
PC-side software is stored in the camera menu, can be downloaded through the menu operation to the
SD card. The latest updates software are available on the EREAGLE website.
Setting steps:
1. First of all, click "Download documents" in the camera menu “version” option, the camera manual and
PC-side software will be automatically stored in the SD / TF card. PC-side software contains "Set APP",
respectively for camera parameters and communication parameter settings.
2. Use the USB cable to connect the camera to the PC, find the appropriate software in the SD card on
the PC and open it, then install it.
3. Open the settings software, select the product model, select the storage location for the camera in the
SD card root directory.
4. Set the corresponding camera parameters and communication parameters according to your need.
5. After setting, click to generate the configuration file, the parameter configuration file will be
automatically stored in the camera SD card.
6. Disconnect the USB cable, restart the camera, the parameter settings complete.
Language and model selection interface
The copy of Generated configuration files to the SD card is still valid.
