EG-IoT_UG_demonstrator_006_UK
.docx
Page 4 / 34
Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER SAS reserves the right to make any
modifications. This document is the property of ERCOGENER SAS. It may not be reproduced or disclosed to a third party without the written
consent of ERCOGENER SAS.
Warning
This document contains the commissioning information for engineering samples
EG-IoT_xxxx
based on an
embedded demonstration application.
ERCOGENER cannot be held responsible for:
- Problems arising from improper use of the
EG-IoT xxxx
.
- Problems arising from improper configuration
- Dysfunctions arising from the absence or poor coverage of GSM, GPRS, UMTS, LTE Cat.M1, GNSS, LoRa,
Sigfox networks
- Dysfunctions if the product is used for the monitoring of physical persons where human life is at stake.
ERCOGENER reserves the right to modify the functionalities of its products "
EG-IoT xxxx
" without prior
notice.
-
When the equipment is open, do not carry out any operations other than those provided for in this
document
.
- No internal parts can be repaired by the user. The
EG-IoT xxxx
must be returned to the factory for repairs.
- In order to ensure electromagnetic compatibility, the length of the serial link cable, the power cable and the input /
output cable must not exceed a length of 3 meters.
- The
EG-IoT xxxx
must not be powered directly by the mains, a voltage adapter must be used.
DISPOSE OF BATTERIES AND USED BATTERIES IN ACCORDANCE WITH USUAL
INSTRUCTIONS.
Symbols used
The following symbols are used to highlight important information in the manual.
Essential information for the integration and performance of the module.
Warning indicating actions that could harm or damage the module
