EG-IoT_UG_demonstrator_006_UK
.docx
Page 16 / 34
Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER SAS reserves the right to make any
modifications. This document is the property of ERCOGENER SAS. It may not be reproduced or disclosed to a third party without the written
consent of ERCOGENER SAS.
5.6
Update of embedded software via Boot loader
For this, you must have the application
STM32 Flash Loader.exe
with its dll :
STBootLib.dll
You also must have the new (latest) application to be installed:
EG-IoT_Traceur_Vx.xx.bin (example)
Start the program
STM32 Flash Loader.exe
1) The following window appears:
Select the port corresponding to
the cable
2) Select the port speed, other than
115 200 bauds:
3) Select the file
Select a port speed other than 115 200 bauds.
The software is ready to load the new application.
From the configuration menu
Enter Z and then Y (strongly advised)
Enter U and then Y
z
Do you want to erase memory ? (Y-N)
y
In progress...
…
…
u
Are you sure to enter in Bootloader mode ? (Y-N)
y
Bootloader waiting for STM32 Flash Loader...
Close the COM port currently used
