8
Operators Manual ES-643P
On the left side the guide rail is screwed together with
the holder of the height adjustment with the screws
M8x55.
The shift rod is screwed to the frame at the bottom with
the shift lever. Insert the screw from the inside to the
outside and place a washer between the components.
The assembly on the gearstick lever is done in the same
way. First tighten the two screws firmly, then loosen
them again by half a turn.
Loosen the fastening screw on the gearstick lever half
a turn and check that the gearstick moves smoothly.
