background image

18

Operators Manual ES-648E 

AKKUVEC

Certificate of Conformity

Manufacturer: 

   ECHO 

Motorgeräte

 

 

    Vertrieb 

Deutschland 

GmbH

 
Address:    Otto-Schott-Str. 

7

 

 

    72555 

Metzingen

 

 

    Germany 

declare that the new leaf and waste vacuums described below 

 

   

 Brand: 

 ERCO 

 

    Type: 

 ES-648E 

AKKUVAC

 

 

    

complies with the provisions of EC Directive 22006/42EG, 2004/108/EG, 2000/14/EG, DIN EN ISO 13857.

The device has been tested and manufactured according to EN ISO14982:2009, EN 60335-2-69:2009,    
IEC 60335-1:2010 and compliance with these guidelines has been checked by TÜV Rheinland.

Place of storage of the technical documentation:
ECHO Motorgeräte Vertrieb Deutschland GmbH, Otto-Schott-Str. 7, 72555 Metzingen, Germany 

Measured sound power level 

88 dB(A)

Guaranteed sound power level 

88 dB(A)

Vibration acceleration on the handlebar 

0,2 m/s²

Precariousness 

0,1 m/s²

The undersigned, representing the manufacturer, herewith declares the product conforms with the standards 
shown herewith.

 

 

Frank Ueberfuhr 

Technical Manager 

Date of Declaration: 20/03/18

Summary of Contents for AKKUVAC ES-648E





















Reviews: