Erbe APC 300, Notes On Use

Page: 21 / 182

21
8. Slowly unscrew the gas cylinder valve until it is fully open.
Then turn it back again approx. a half-turn. Argon now flows
into the lines (a brief hissing sound may be heard)
WARNING! If the hissing sound continues for more than 2
seconds, there is a leak. Close the gas cylinder valve again
immediately. Check whether the connection of the pressure
reducer and the pressure line is in fact leak-tight. The APC
device may only be used when the leak has been rectified.
5
Cleaning and disinfection
Do not sterilize!
The pressure reducer may only be cleaned from the outside. To
do so, use a cotton flannel and a medical-grade alcohol solution.
All other methods of cleaning are prohibited!
WARNING! Flammable and explosive materials must have evap-
orated fully prior to switching on the APC device and the electro-
surgical unit.
OBJ_DOKU-194191-002.fm Seite 21 Donnerstag, 9. Juni 2016 11:08 11