Erbe APC 300, Notes On Use

Page: 28 / 182

28
The APC 300 pressure reducer is intended exclusively for con-
nection to an argon gas cylinder aimed at supplying argon to the
Erbe APC 300.
Only argon (Ar) may be used as the working gas.
WARNING!
3
Safety instructions
3.1 Using gases and their containers when under high
pressure
Transport, storage and other activities may only be carried out
by qualified personnel and using appropriate equipment!
Do not use oil or grease.
Protect the gas cylinder against heat generated by radiators or
exposed flames.
Do not apply force of any kind to gas cylinders, cylinder connec-
tors, pressure reducers or the pressure line. Check the seals of
the pressure reducer and the pressure line for damage prior to
use. Do not use damaged gas cylinders, cylinder connectors,
pressure reducers or pressure lines. Inform your gas supplier or
ERBE Elektromedizin without delay.
When transporting, storing, or using the gas cylinder, prevent it
from falling over or dropping by securing it with chains, hoops,
or safety straps. Always use the safety strap of the mobile equip-
ment cart.
Detach the pressure reducer prior to transporting the argon gas
cylinder.
Argon gas cylinders may only be connected to the APC device us-
ing the pressure reducer and pressure lines specified by Erbe!
Only use argon gas cylinders that correspond to the respective
national safety standards.
OBJ_DOKU-194191-002.fm Seite 28 Donnerstag, 9. Juni 2016 11:08 11