Erbe 20132-046, Notes On Use

Page: 39 / 270

39
3. Screw the irrigation adapter onto the argon gas connection
of the cable.
4. Fill up the syringe completely with irrigation liquid.
5. Screw the syringe onto the luer-lock adapter.
6. Flush the internal lumen of the product to remove as much
contamination as possible.
7. Remove the syringe. Leave the luer-lock adapter on the
product for the next reprocessing steps.
5.6 Manual Cleaning and Disinfection
Use a liquid detergent suitable for the preparation of a dipping
bath.
Use a disinfectant compatible with the detergent suitable for the
preparation of a dipping bath.
The detergent and disinfectant must be suitable for medical de-
vices made of plastic and metal and have a pH value between 5.5
and 11.
Observe the specifications from the manufacturer of the deter-
gent and disinfectant and in the chapter “Overview of Validated
Procedures“.
1. Prepare dipping bath, soak product:
– Use the cleaning solution to flush the internal lumen
several times.
– Fill the internal lumen with cleaning solution.
– Remove the syringe and luer-lock adapter.
– Submerge the product into the cleaning solution com-
pletely. The immersion time must be at least 5 minutes.
– Take the product out of the dipping bath and extend the
cable as far as possible for the next work step.
OBJ_DOKU-189884-007.fm Seite 39 Freitag, 11. Juni 2021 10:59 10