Erbauer ERB807A, Manual, Page: 6 / 20

ADDITIONAL SAFETY POINTS FOR YOUR JIGSAWS
1. If the supply cord is damaged have it replaced by a qualified person.
2. Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
3. Ensure your mains supply voltage is the same as your tool rating plate voltage.
4. Your tool is double insulated for additional protection against a possible electrical
insulation failure within the tool.
5. Always check walls and ceilings to avoid hidden power cables and pipes.
6. After long working periods, external metal parts and accessories could be hot.
7. Wear eye protection when operating this tool.
8. The base plate must always be held firmly against the material being cut to reduce
saw vibration, blade jumping and blade breakage.
9. If possible, ensure the workpiece is firmly clamped to prevent movement.
10. Your Jigsaw is a hand held tools, do not clamp your Jigsaw.
11. Before cutting, check the cutting line is free of nails, screws, etc.
12. Never stop the cutting blade by applying side pressure to the blade.
13. Only withdraw the blade from the cut when the blade has stopped moving.
14. Only use blades in excellent cutting condition.
15. Always use the appropriate safety equipment that is required for the product. e.g.
Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of
over 85 dB(A), Gloves and face masks. In all cases ensure that the safety equipment is
in good condition.
SFX-ERB807A-M-050920.indd 6 2005-9-20 15:40:00