ERBAUER 250MM TABLE SAW
ERBAUER 250MM TABLE SAW
ERBAUER 250MM TABLE SAW
ERBAUER 250MM TABLE SAW
6. Safety precautions
a. Do not use saw blades which are damaged or deformed.
b. Replace table insert when worn.
c. Use only saw blades recommended by the manufacturer and which
are the exact bore and diameter required for this machine.
When
changing the saw blade beware that the width of the groove cut of the saw blade
shall not less than and thickness of the body of the saw blade shall not be more than
the thickness of the riving blade.
d. Take care that the selection of the saw blade is suitable for the
material to be cut.
e. Wear suitable personal protective equipment when necessary, this
could include:
- Hearing protection to reduce the risk of induced hearing loss.
- Respiratory protection to reduce the risk of inhalation of harmful
dust.
- Wear gloves when handling saw blades and rough material.
Saw blade
shall carried in a holder whenever practicable.
i. Connect circular saws to a dust-collecting device when sawing
wood.
The operator shall be informed of the factors that infl uence exposure of dust
e.g. type of material being machined and importance of local extraction (capture or
source) and proper adjustment of hoods/baffi es/chutes.
j. Do not use high speed steel (HS) blades.
k. The push-stick or push block should always be stored with the
machine when not in use.
7. Safe operation
a. Use push-sticks or push blocks to feed the workpiece past the saw
blade.
b. Use correct adjustment of the riving blade.
c. Use correct adjustment of the upper saw blade guard.
d. Saws shall not be used for slotting (stopped groove).
e. Use only saw blades for which the maximum possible speed is not
less than the maximum spindle speed of the tool and the material to be
cut.
f. When transporting the machine use only transportation devices and
do never use guards for handling or transportation.
g. During transportation the upper part of the saw blade should be
covered , for example by the guard.
