Model WC601B Bushing Installation Drawing
1. Install the entrance bushing chamfer side out (to the left). Make certain it does not interfere with the feed belts
when they are fully closed. Tighten the set screw to lock its position.
2. Insert chamfered side of head bushing toward belt feed. Position it so that the end opposite the chamfer is as
close as possible to the blade without interference when cutter head is engaged. Lock its position with the set screw.
3. Adjust blade depth stop before installing the exit bushing. Insert the exit bushing chamfer side out (to the right).
Position it so that the end opposite the chamfer is as close as possible to the blade without interference when cutter
head is engaged. Lock its position with the set screw.
