AUTOMATIC ROTARY BLADE
TUBING CUTTER
Eraser Company Inc. • Syracuse, NY USA • Ph: 315-454-3237 • [email protected] • www.eraser.com • Fax 315-454-3090
Eraser International Ltd. • England • Ph:(01264)351347 • [email protected] • www.eraser-international.com • Fax (01264)355030
SPECIFICATIONS
Maximum Cut Length.......................................…23,300.00"
(233,000.0mm)
Minimum Cut Length............................……0.100" (2.54mm)
Maximum Material Size…..................….500” OD (12.7mmø)
Tolerances.......... At cut lengths of under 2” (51mm) on most
materials, the tolerance is ±0.01”(.25mm). All other cut
length tolerances are 1% or better dependent on material and
feed. Programmable length compensation of ±99% is built
into the unit to accomodate unusual materials. Squareness
of cut is 0-2 degrees.
Batching...................……Up to 99 programmable batches
Kits.......................................Up to 10 programmable kits
Blades.................……Razor type double beveled steel blade
Feed....................................Dual driven adjustable belt feed
Bushings.........…Purchased separately. Customer material
sample is required to drill bushings.
Counter...........................................................…0-999,999
Power..................................………115V 60Hz or 230V 50Hz
Decibel Rating...............................................…….60 db(A)
Size....................................................…...14” x 13” x 8.75”
(356mm x 330mm x 222mm)
Weight.....................................................26 lbs. (11.8 Kg)
ORDERING INFORMATION
AR7131 (WC601B)………..................Variable speed rotary
tubing cutter, 115V 60 Hz
AR7132 (WC601B)………..................Variable speed rotary
tubing cutter, 230V 50 Hz
AR7133 (WC601B)….........…….........Variable speed rotary
tubing cutter, 230V 60 Hz, UK plug
IR1017…………....…………...........Set of custom bushings
for WC601B (Send material for sizing)
PR0232...................................One replacement feed belt
(2 necessary per unit)
PG0677......................One replacement drive belt for WC601B
Feed Rate:
There are nine selectable feed rates. In addition, cut time and cut
speed of the rotary head are selectable. Production rates are variable
by length of cut pieces, feed rate and cut speed and time.
Production Rates:
There are nine selectable belt feed rates and cut head rotation
speeds as well as an infinitely adjustable time parameters.
Production rates vary, most importantly, according to difficulty
of cutting (i.e. cut time) and, to a lesser degree, difficulty in
transport (i.e. how much material is being feed, how heavy of
a spool, how sophisticated the pre-feed system, etc.). If
production rates are critical, send 20 feet or more (most
accurate determination if you send the spool intended to use
in production) to our lab for cut testing. The following table
shows some typical production rates. These rates were devel-
oped using an average cut time for a typical range of materials.
1 sec. cut time Length 2" Length 6" Length 10" Length 20"
Linear speed
Feed Rate #
51mm
152mm
254mm
508mm
(feed belts)
5.7 in./sec
(144mm/sec)
8.0 in./sec
(203mm/sec)
12.2 in./sec
(309mm/sec)
16.6 in./sec
(421mm/sec)
20.8 in./sec
(528mm/sec)
25.1 in./sec
(637mm/sec)
29.3 in./sec
(744mm/sec)
33.4 in./sec
(848mm/sec)
39.8 in./sec
(1011mm/sec)
Various Feed Lengths in pcs./hour
1
1700
1300
1100
700
800
3
2050
1800
1500
1100
2
1900
1500
1200
1300
5
2150
1950
1750
1400
4
2100
1900
1650
1450
7
2200
1950
1900
1550
6
2150
1950
1800
1650
9
2200
1950
1900
1650
8
2200
1950
1900
