27
Network configurations
26
Network configurations
When the following screen appears,select "Obtain an IP
address automatically" and "Obtain DNS server address
automatically" and click <OK>.
5.
To configure NEOTUS' Settings,turn on the NEOTUS moni-
tor and press the input signal button
to conver to the network and click the "Setup" menu from the
start page.
6.
Set "Autodetection" for terminal-server connection list,as
shown below.
8.
Click the "Network" tab and select "Get Dynamic IP address
(or "Use Static IP address ")and enter the IP address and
the gateway.
7.
Click the 'TS Options' tab and configure as follows.(Enter the
host computer's IP address in the Terminal Server Network
address field.)
9.
In the Dos prompt window,enter "ipconfig" and hit the
<Enter>key to obtain the IP addreass, subnet mask
and gateway assigned to the PC.
3.
Enter the IP address found here in the Terminal Server network address"field of the NEOTUS.
Above settings can be verified from the monitor connected directly to the PC or from an already installed
NEOTUS monitor.
·
You can find the IP address as follows.
4.
In the "Open" field,enter "cmd" and click <OK>.
2.
Click <Start>from Windows and select "RUN".
1.
An IP address has been automatically allocated to the PC,and you need to know this IP addres.
●
References
