#815-1200 W73rd Ave, Vancouver, BC, V6P6G5, Canada Phone: 888-387-3787 or 604-266-8547 www.equustek.com
5
2
Hardware Specifications and Layout
The DL4500 Hardware Platform has the following specifications.
2.1 Operating
Specifications
Our DH+/RIO versions A-B Channel allows Synchronous Transformer Coupled SDLC
connection to Allen Bradley DH+ or RI/O. Speeds of 57.6K, 115.2K and 230.4K Baud
are available in both networks.
Our DH-485 versions A-B Channel allows for Isolated DH-485 (RS485) connection to
Allen Bradley DH-485 network. Speeds of 4800, 9600 and 19.2K (default) Baud are
available.
Ethernet Channel allows 10 Base-T connections to TCP/IP and other Ethernet networks.
Currently Full and Half Duplex DF1 protocol with BCC error checking is tunneled over
the Ethernet TCP/IP link. Modbus TCP makes use of our proven Modbus to AB network
interoperability.
Simple Parameter Configuration using menu driven Windows based Programs via
Ethernet 10 Base-T.
Configuration and Reset Pushbuttons go into BIOS features and Flash Setup and do a full
Hardware Reset.
Operating Parameters are stored in Non-Volatile Serial EEPROM.
The DL4500 uses FLASH upgradeable firmware from either the supplied DL32
configuration program or once can use a HyperTerminal type program set to 9600,N,8,1
and XON/XOFF flow control.
Bi-Color (Green/Red) LED’s for Ethernet and A-B Channels indicates activity and status.
Green POWER LED indicates power on.
Green LED’s for Ethernet Link and Tunneling Status.
Red LED for Ethernet Diagnostic Status.
