23
How to attach the spare tire mount or outrigger pad storage:
1. Attach the accessory to the center-left section on the front of the RB4000.
2. Align the installation holes on the sides of the accessory to the holes on the front of the dump
box. Insert each of the 2 rods fully through the holes. Secure the accessory by clipping the provided
cotter pins through the small hole in each rod.
Figure 32. Spare Tire
This portion of the User’s Manual contains tire safety information as required by 49 CFR 575.6. This
section covers:
“Steps for Determining Correct Load Limit - Trailer.”
“Steps for Determining Correct Load Limit – Tow Vehicle.”
A Glossary of Tire Terminology, including “cold inflation pressure,” “maximum inflation pressure,”
“recommended inflation pressure,” and other non-technical terms.
Information from the NHTSA brochure entitled “Tire Safety – Everything Rides On It”. This brochure, as well
as the preceding subsections, describes the following items;
• Tire labeling, including a description and explanation of each marking on the tires, and information
about the DOT Tire Identification Number (TIN).
• Recommended tire inflation pressure, including a description and explanation of:
a. Cold inflation pressure.
b. Vehicle Placard and location on the vehicle.
c. Adverse safety consequences of under inflation (including tire failure).
d. Measuring and adjusting air pressure for proper inflation.
• Tire Care, including maintenance and safety practices.
T I R E S A F E T Y I N F O R M A T I O N
Summary of Contents for RB4000
