Equipex SODIR 350-E, Operation Manual

Page: 5 / 18

Cleaning
WARNING: Disconnect (unplug) electrical power supply before cleaning
Cleaning is very important in maintaining a safe and well working machine. Allow the
crepe machine to cool so it is ‘warm to the touch’ before cleaning. To clean the crepe
maker, use a cloth dampened slightly with soap and water to clean the stainless steel
housing and plate(s). A common green nylon scrubbing pad may be used to
remove any carbon deposits from the crepe plate(s). Clean the crepe maker
thoroughly at the end of each day. Failure to do so may cause hard to remove build
up. Make sure no water enters the unit through the ventilation holes around the unit
and under the top plate(s).
DO NOT use an abrasive sponge on exterior surfaces
DO NOT wash the Crepe maker under running water
DO NOT allow water to drip into the housing or onto electrical components
Maintenance
You should inspect all parts on a regular basis to ensure that all is in proper working order. If a
part is damaged, have the unit repaired by an authorized service agency prior to returning the
unit to operation. If you have trouble locating a service agency in your area, please consult our
website at
http://www.equipex.com/ , or call us at 1-800-649-7885 and ask for customer service.