Equipex SODIR 350-E, Operation Manual

Page: 3 / 18

INTRODUCTION
The SODIR models 350 and 400, FE, E and ED (double) crepe machines are
designed to offer quality crepe making. They are constructed of food service quality
stainless steel, and are equipped with fine grain cast iron plates, with a baked on high
temperature resistant non-stick enamel. The plates are heated by a replaceable spiral
cal-rod element, designed to ensure rapid rise in temperature and uniform heating of
the entire surface. The heating elements are thermostatically controlled up to 550 F
with separate controls for one (single machines), or two (double machines) plates.
These controls are equipped with an integrated power switch, except the –FE models.
The –E and –ED models have one set of green and orange indicator lights per control.
The –FE models have one orange indicator light. All models come with one T-shaped
wooden batter spreader per plate.
Specifications:
Model Electrical Plug
Configuration
350-FE 120V, 1PH, 1.65KW, 14A NEMA-5-15P
400-FE 208/240V, 1PH, 3.5KW. 13/15A NEMA-6-20P
350-E 208/240V, 1PH, 3.3KW. 12/14A NEMA-6-20P
400-E 208/240V, 1PH, 3.9KW, 15/17A NEMA-6-20P
350-ED 208/240V, 1PH, 7.9KW, 29/33A NEMA-6-50-P
400-ED 208/240V, 1PH, 7.9KW, 29/33A NEMA-6-50-P
INSTALLATION
The SODIR crepe machine needs to be connected to a grounded outlet of proper
voltage, 208/240V or 120V, depending on the model. DO NOT place the unit in a
damp area or near steam sources. Make sure that the side ventilation panels are not
blocked. Maintain at least 4” clearance at each side and rear of the crepe machine.