www.prolight.co.uk
Party Par
User Manual
5
Sound active mode:
To access this mode plug the fixture in and put dipswitch #10 in the
“ON”
position. The fixture will now
react to sound.
To exit this mode put the dipswitch in the
“OFF”
position.
Auto mode:
To access this mode plug the fixture in and put dipswitch #9 and 10 in the
“ON”
position. The fixture will
now chase through the colours. To adjust the speed put the dipswitches #1 to 7 in the
“ON”
position
(1 being the slowest, 7 being the fastest).
To exit this mode put the dipswitches in the
“OFF”
position.
RGB mode:
To access this mode plug the fixture in and put dipswitch #8, 9 and 10 in the
“ON”
position.
Dipswitch #1 placed in the
“ON”
position will project red at 25% intensity, whilst dipswitch #2 will
project at 50% intensity. Combining both dipswitches #1 and 2 will project red at 100% intensity.
Dipswitch #3 placed in the
“ON”
position will project green at 25% intensity, whilst dipswitch #4 will
project at 50% intensity. Combining both dipswitches #3 and 4 will project green at 100% intensity.
Dipswitch #5 placed in the
“ON”
position will project blue at 25% intensity, whilst dipswitch #7 will
project at 50% intensity. Combining both dipswitches #5 and 6 will project blue at 100% intensity.
To exit this mode put the dipswitches in the
“OFF”
position.
Master/slave mode:
For master/slave operation, set the first fixture (master) into sound, auto or RGB mode. Now set the
remaining fixtures into slave mode by setting dipswitch 1 to the
“ON”
position and all other dipswitches
to the
“OFF”
position.
To exit this mode put the dipswitches in the
“OFF”
position.
Operating instructions