background image

  

EQD

®

                                                                              2                                                                  EQ2688

BATTERIES

• Do not cast away batteries in a fire.

• Do not disassembled, overheat, or short-circuit the batteries.
• If the battery is replaced in the wrong way, it may cause danger of explosion. Replace only with the 

same or equivalent type.

Dispose used batteries.

To preserve our environment, dispose of used batteries according to your local laws or  regulations.

CLEANING
Cleaning the AC power plug

Unplug the AC power plug and clean it regularly. If the plug is covered with dust and gath-
ers moisture, its insulation may deteriorate and result in a fire.

Cleaning the screen surface/cabinet of the TV set

When cleaning this TV, unplug the AC power cord. If not, it may result in electric shock. 
Use a dry soft cloth to clean the cabinet of the TV. To remove dust near the screen, wipe it 

gently with a soft cloth. Stubborn stains may be removed with a cloth slightly dampened 

with a solution of mild soap and warm water. Never use strong solvents such as thinner or 
benzine for cleaning. If using a chemically pretreated cloth, please follow the instruction 

provided on the package. The ventilation holes can accumulate dust over time.
To ensure proper ventilation, we recommend you to remove the dust periodically (once a month) using 
a vacuum cleaner, while the LCD TV is powered off.

Summary of Contents for Auria EQ2688


























Reviews: