background image

EQD

®

                                                                              iii                                                                  EQ2688

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 

2002/95/EC of the European Parliament and the Council on restriction of the use of 

certain hazardous substances in electrical and electronic equipment (RoHS Directive) 

and is deemed to comply with the maximum concentration values issued by the Euro-
pean Technical Adaptation Committee (TAC) as shown below:

Certain components of products as stated above are exempted under the Annex of 

the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other 

lamps not specifically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, 

and electronic ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by 

weight or more lead).

Lead as an allotting element in steel containing up to 0.35% lead by weight, alumin-

ium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% 

lead by weight.

Substance

Proposed 

Maximum

Concentration

Actual 

Concentration

Lead (Pb)

0.1%

<0.1%

Mercury (Hg)

0.1%

<0.1%

Cadmium (Cd) 

0.1%

<0.01%

Hexavalent Chromium (Cr6+)

0.01%

<0.1%

Polybrominated biphenyls (PBB)

0.1%

<0.1%

Polybrominated diphenyl ethers 

(PBDE)

0.1%

<0.1%

Summary of Contents for Auria EQ2688


























Reviews: