UHF Transceiver Module TRX916 User
Manual
V
1.0
eQ-3 Limited
Page : 12 of 12
17.4 Labeling Requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements
are met.
The transceiver module is labeled with FCC ID: RNT-TRX916. This label is
permanently fixed to the module.
If the module is mounted inside a terminal equipment, the label will not be visible. In this
case the OEM must ensure that the terminal equipment is labeled with an exterior label
containing the expression “Contains Transceiver Module FCC ID: RNT-TRX916” or
“Contains FCC ID: RNT-TRX916”.
See FCC Part 15, Section 2.925 (d) to (f) for detailed information according size, printing
etc.
.
17.5 RF Exposure
The transceiver module meets all applicable RF exposure requirements. The EUT operates
under the provisions of FCC Part 15, section 15.249 with a maximum allowed field
strength of 50 mV/m, equivalent to 0.8 mW EIRP.
The Original Equipment Manufacturer (OEM) must ensure that the antenna used for this
portable transmitter provides a separation distance of 2.5cm or more from all persons to
satisfy RF Exposure compliance.
17.6 Performance Information
This transceiver module is not designed for use in highly reliable communication systems;
e.g. serving human life inherent systems (systems where failure may result in a physical
risk to a person).
18 Ordering
Information
Ordering part number
Description
MOQ
73927 TRX916
1000
19 Disclaimer
eQ-3 Limited believes the information contained herein is correct and accurate at the time
of this printing. However eQ-3 Limited does not assume any responsibility for the use of
the described product.
