54
55
Start-up
Start-up
2
2
1
1
2
2
• Now drill the bore holes. If you are working with a stone
wall, drill the marked two 5 mm holes and insert the
plugs supplied. If you are working with a wooden wall,
you can pre-drill 1.5 mm holes to make screws easier
to insert.
• Use the screws and plugs supplied to fasten the mount-
ing plate
(K)
to the wall.
• Next, attach the frame
(L)
to the mounting plate
(K)
and
attach the electronic unit
(M)
.
• Make sure that the arrows on the back side of the elec-
tronic unit
(M)
point upwards and that the clips on the
mounting plate
(K)
latch into the openings on the elec-
tronic unit
(M)
.
8.4 Installation in multiple combinations
You can mount the room thermostat with the attachment
frame
(L)
provided or use it with frames of other manu-
facturers as well as integrate the electronic unit
(M)
into a
multi-gang frame. In both cases, mounting with adhesive
strips and screws is possible. For mounting with multiple
combinations, make sure that the mounting plate
(K)
of
the room thermostat is seamlessly aligned to the already
fixed mounting plate/retaining ring.
The HomeMatic Room Thermostat is designed to fit into
frames supplied by the following manufacturers:
Manufac-
turer
Frame
Berker
S.1, B.1, B.3, B.7 glass
ELSO
Joy
GIRA
System 55, Standard 55, E2, E22,
Event, Esprit
merten
1-M, Atelier-M, M-Smart, M-Arc, M-Star,
M-Plan
JUNG
A 500, AS 500, A plus, A creation
If changes or works have to be made on the house
installation (e.g. extension, bypass of switch- or
socket inserts) or the low-voltage distribution for
mounting or installing the device, the following
safety instruction must be considered:
Only to be installed by persons with the
relevant electro-technical knowledge and
experience! (*1)