58
59
Teach-in:
Teach-in:
> 3 Sec.
• The antenna symbol ( ) is displayed, along with the
teach-in time remaining in seconds. The teach-in time is
30 seconds.
• Now put the device you wish to teach-in to the room
thermostat (e.g. HomeMatic Radiator Thermostat, see
the following fig.) into teach-in mode. Please follow the
relevant operating manual instructions of the corre-
sponding device.
> 3 Sec.
• After teaching-in has been successful, “AC” appears and
the display returns back to normal display.
If you have already configured a HomeMatic
Radiator Thermostat and would like to teach-in the
device to the room thermostat, please put the
radiator thermostat into teach-in mode first. All your
settings will be saved and transmitted to the room
thermostat.
The teach-in mode can be interrupted at any time
by pressing the boost button ( ) again shortly.
If “nAC” appears in the display, the teach-in
procedure has not been successful. In this case,
please try again.
Please repeat the teach-in procedure for all devices
that communicate with each other.
9.2 Teaching-in to a HomeMatic Central Con-
trol Unit
Your device can be conveniently
• controlled and configured,
• connected directly to other devices or
• used in central control unit programs using a soft-
ware-based method.
For this purpose, it needs to be taught-in to the Home-
Matic Central Control Unit first. New devices are taught-in
to the central control unit using the HomeMatic “WebUI”
user interface.
