Quadro Manual I: Installation Guide
Step 1: Installing the QuadroCS
Connecting the Hardware
•
QuadroCS behind a router
Fig. I-5: Installation: QuadroCS behind a router
•
QuadroCS directly connected to the Internet
Fig. I-6: Installation: QuadroCS directly connected to the Internet
•
Verify the product package contents are complete. Refer to the contents sheet included
in the packaging to determine if all the items were shipped in the box.
•
Before you connect the hardware, make sure that all devices are powered off.
Connect the Ethernet port on your PC via a straight CAT 5 cable with an RJ-45 connec-
tor to the LAN socket of the Quadro. If a hub or switch is connected between the
QuadroCS and your PC, us
•
e a crossover cable from the LAN interface of the
•
QuadroCS to the hub/switch.
•
Connect the WAN port of the QuadroCS to the Internet service.
Connect the power adapter to the POWER port on the QuadroCS’s rear panel and plug
the power adapter into a power outlet. Only use the original power adapter and plug it
into a power strip with surge protection or to a UPS if available.
The red LED (Fault) will glow for several seconds followed by the yellow LED (Info),
for several minutes.
which will glow
As soon as Info is off, the QuadroCS is operational.
Power up any PC on the LAN side.
QuadroCS (SW Version 3.1.x)
10
Summary of Contents for QuadroCS SW-Version
Page 1: ......
