Quadro Manual I: Installation Guide
Hardware Overview
Hardware Overview
QuadroCS Rear Panel
Fig. I-1: QuadroCS Rear Panels
1 Power socket. Use only the power adapter delivered with the QuadroCS.
2 RJ-45 socket to attach the Local Area Network (LAN) via an Ethernet CAT 5 cable. If
a PC is connected directly to this socket, a straight cable is used. If an Ethernet hub,
router or switch is used, a crossover cable may be required.
3 RJ-45 socket to attach the Internet Uplink (WAN) via an Ethernet CAT 5 cable.
4 The USB socket enables connectivity of USB flash memory providing additional stor-
age space for recorded conferences. Refer to the Administrator Manual for supported
devices.
5 The Reset button may be used in two ways: (1) to initiate a normal reset, (2) or a fac-
tory reset. A normal reset is executed by pressing the Reset button with a paper clip
for an instant.
Pressing the reset button and holding it down for 7 seconds or more will execute a
factory reset. This will restore the factory defaults and clear all settings including the
IP address and the administration password you entered.
Please Note
: A Factory Reset forces the default LAN IP address of 172.30.0.1 and
default administrator password of 19.
QuadroCS (SW Version 3.1.x)
6
Summary of Contents for QuadroCS SW-Version
Page 1: ......