JA12132021
U-00222
4
c
c
c
c
c
c
c
c
c
c
Screen Material
Step 6:
Put on the
white gloves (p)
and carefully unroll the screen material on a clean surface from the roller to the
other side as shown below. The back
side of the screen material should be
placed upwards. Then place a
bottom
grommet
(r
) on the screen material’s
eyelet and snap in the
top grommet
(s)
as shown below.
Repeat the process for all eyelets.
Step7
: Carefully place the screen on top of the assembled frame as shown below.Make sure that the angular
edges
of the frame are not allowed to come into direct contact with the screen material to avoid puncturing.
Step 8:
Insert the
rods (r)
through the sleeves according to their corresponding lengths on each edge of the
screen as shown below. The short rods (top/bottom) will overlap to secure a firm grasp in the middle areas.
Front
Back Side
r.
(Red tips)
Back Side
r.
(Black tips)
Back Side
Back
Side
Go through the hole
from bottom to top
