9
030714-JA
www.elitescreens.com
Edge trim Installation
The Aeon fixed screen is edge free, but you may install the trim strip to provide it with an elegant pencil thin bezel
finish.
1. Put the assembled frame on the flat and clean surface (Please face up), and then stick the black tape on the center
of the top and bottom of the screen, please align the tape with the edge of the screen, as shown in the fig.
2
．
Then align and adjust the edge trim with the screen edge to make the four corners into a better joint. (Note: please
don’t remove the tape on the trim, and put the trim with Elite logo on the bottom right). As shown in the
following figs.
3. After alignment, please take down the trim A, remove the inside tape and stick on the original place.
And accordingly stick B-C-D-E-F trims. As shown in the following fig.
The
front side
of the frame with trim
The
back side
of the frame with the trim
installed
Edge trim x 6 PCS
Black tape x1pcs
trim
strip
The curtain
The black tape
The black tape
A B
F C
E D
