2
030714-JA
www.elitescreens.com
Frame Assembly
Note: Refer to the section “ Splicer Installation” if joining two or more frames.
1.
Insert the center joint into one of the ½ horizontal frames and fasten it with the two
M5x15 screws
(H).
2.
Insert the other ½ horizontal frame piece to the center joint and fasten also using two
M5x15 screws
.
3.
Repeat steps 1 and 2 for assembling the second horizontal frame.
Push Push
4.
Insert and slide in one
M6 screws
(G)
through the channel located on the back each
horizontal frame.
5.
Insert the
elbow joint (A)
into each end of the
horizontal frames
(B)
as shown below.
Horizontal long frame (B)
Elbow Joint (A)
Push
Elbow Joint
(A)
Place one
M6 hex screw (G)
in the center for attaching the
center support bar (E)
Horizontal long frame
Face up
M6 hex screws (G)
Horizontal frame
Center Joints
Top right Frame
Top left Frame
